Plug-and-Play Install
Pre-piped and pre-wired at the factory. No on-site assembly, no leak-prone fittings, no specialist installer needed — turn it on and run.

AGB Series · Compressor + Dryer + Tank
Compressor, refrigerated dryer and air-receiver tank pre-assembled into one compact, plug-and-play package — eliminating 80% of installation time, leak points and floor space versus a traditional three-piece compressor room.
Power Range
5.5 – 15 kW (7.5 – 20 HP)
Working Pressure
0.8 MPa
Air Delivery
0.75 – 2.3 m³/min
Tank Volume
300 L / 500 L
Sole / authorized distributor in Malaysia · Genuine parts · Full manufacturer warranty
Built and configured for reliable continuous performance in Malaysia's hot, humid tropical climate — designed to keep factories running without compromise.
A traditional setup needs a screw compressor, a refrigerated dryer, filters, an air tank and metres of interconnecting piping — every joint is a potential leak and pressure drop. The Genexis AGB integrates all five into one factory-tuned unit, eliminating the leading causes of failure in compressed-air systems: incorrect sizing and bad installation.
Perfect for SMEs, workshops and production lines with limited floor space — drop it in, plug it in, and you have clean, dry compressed air on the same day.
80%
Less installation time, material and cost vs traditional compressor room
Pre-piped and pre-wired at the factory. No on-site assembly, no leak-prone fittings, no specialist installer needed — turn it on and run.
Compressor + dryer + tank in one compact footprint. Frees floor area for production while keeping the air system out of the way.
Built-in refrigerated dryer plus coalescing and particulate filters remove water, oil and particles — protecting tools, valves and finished product.
Matched components, low-pressure-drop internal piping and energy-saving cycling keep electricity use down for the life of the machine.
German-design twin-screw profile delivers more m³/min per kW, with low rotational noise and long service life.
Built-in cycling refrigerated dryer drops pressure dew point to ~3 °C — ideal for tropical Malaysian conditions.
300 L or 500 L tank built into the base smooths demand spikes and reduces compressor cycling.
Two-stage filtration removes oil aerosol and solid particles down to 1 µm — Class 1 air quality at the outlet.
Single control panel manages the whole system — no separate dryer wiring, no mismatched start sequences.
Short, factory-tuned pipe runs eliminate the pressure losses and leaks of an externally piped install.
4 models from 5.5 kW to 15 kW. Pre-assembled with 300 L or 500 L air receiver tank.
| Model | Motor Power | Pressure (MPa) | Air Delivery (m³/min) | Tank Volume | L × W × H (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| AGB-7A | 5.5 / 7.5 HP | 0.8 | 0.75 (27 CFM) | 300 L | 1900 × 700 × 1300 | 410 |
| AGB-10A | 7.5 / 10 HP | 0.8 | 1.1 (39 CFM) | 300 L | 1900 × 730 × 1520 | 425 |
| AGB-15A | 11 / 15 HP | 0.8 | 1.5 (53 CFM) | 300 L | 1900 × 700 × 1630 | 475 |
| AGB-20A | 15 / 20 HP | 0.8 | 2.3 (81 CFM) | 500 L | 2000 × 800 × 1800 | 540 |
Pressure in MPa · Air delivery shown per pressure level · Specifications may be updated by the manufacturer without prior notice.
From semiconductor cleanrooms to F&B production lines, the Genexis EGM keeps Penang's factories running.
SME Workshops
Automotive Service
Furniture & Woodwork
Printing & Packaging
Light Manufacturing
Spray Painting
Free on-site sizing in Penang & Northern Malaysia. Same-day install on the AGB 3-in-1 range.

Variable speed permanent magnet motor for maximum energy savings on variable air demand.

Reliable workhorse for factories with consistent, steady-state air demand.

Our best-selling refrigerated air dryer in Malaysia — dual-fan condenser design for stable dew point in tropical heat.